Effluent separation systems
Kessel Separators - Keeping water flowing
For 50 years KESSEL AG has remained in the hands of its founder and now employs over 450 workers who are competent in the field of indoor and outdoor drainage. The product range includes
- Grease Separators
- Oil Separators
- Lifting Stations
- Bathroom Drains
- Shower Channels
- Backflow preventers
Kessel is in the forefront when it
comes to systems that helps in separation of substances from effluents of
Kitchens, Abattoirs and Car wash stations.
Since water is one of our most precious resources and since it's not
available in unlimited quantities, contaminated wastewater from kitchens must
be pretreated and cleaned with the aid of appropriate separator system before
it's discharged to the public sewer system.
Under performing public wastewater treatment facilities leads to
additional costs of maintenance and repair.
Kessel manufactures fully automated separators according to EN 1825,
which gives the end user the ease of operation of disposing off the effluent
with absolute zero odour in the premises.
A 100% environmentally friendly system where the separation happens only
via the law of gravity. EN 1825 norms
doesn't allow to use any enzymes or chemicals for the separation process. After the arrival of a disposal truck, the
contents inside the separator i.e. grease and sludge is macerated / grinded
into a pumpable mass and pumped into the disposal truck, rinsing cycle occurs
with the help of water which is automatically filled to the required quantity.
After the rinsing cycle, the separator is filled up with cold water and it's
ready for it's normal operation. The
ease of use, zero continuous costs like dozing systems, once in a month
disposal, no odour and safe way of disposing off grease is the highlight of a
Kessel Grease Separator.
Oil / fuel Separators
The Kessel Oil / Fuel Separators
are manufactured according to EN 858.
Regulations calls for separating any mineral oils or fuels at source to
protect the sewer and the treatment systems of the city. Oil / fuel separators
are normally installed in car wash stations or any industrial complexes where
such mineral oils can escape into the sewers.
EN 858 norms calls for huge sludge capacities to withhold sludge for
almost a month, which in return helps in lowering disposal costs. The self actuated closure valve, which is a
must within the EN regulations does not allow any of these mineral substances
to escape into the network. Both Grease
and Oil Separators can be installed with 'Ultrasonic Control' that senses the
level of the grease and fuel in real time, to give an intimation to the service
team for emptying of the separators.
Kessel separators are manufactured out of polyethylene and is
warrantied for 20 years.
Want to know more about this product?
Visit Downloads Section